Home Cinema Installations and Firm Transmission Through Doors

The reference level of one soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not hard to listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping typical inside the cinema room. In household installation, quite often we find bedrooms and other living areas to be right next on the Home Cinemas Hertfordshire cinema residence. Special room construction techniques allow us create a sufficient noise barrier, in order to reduce any sound transmission to the adjacent rooms.

However, doors have been been the weakest point, in an attempt. The mass, damping and stiffness of the home cinema door determines its resistance towards the passage of any sound waves. A door’s ability lessen noise is given by its Sound transmission Class. This means, the higher within the Class the better the efficiency.

One more problem arises though; Sound waves can cross any opening with very little impairment. And to top it off, a tiny hole in a barrier would transmit almost as much sound for a much larger hole. This acoustic property of sound could be a significant problem in a small cinema installation, where high quality construction is required. Which is where acoustical gaskets come into have. A home cinema door, so that you can be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the grade of of the acoustical gasket in a home cinema installation, would see how close the particular sound performance of the door, arrives to the published list of specifications. A hi-end home cinema design should take all the info into consideration, to ensure a hi-end acoustical stem.